泉州附近有没有服务

156 6698 0000
 Mesh belt
 Net Conveyor
 Net Conveyor
Industry news
You Are Here: home page  >  Industry news

How to adjust the conveyor belt of chain conveyor to the appropriate strength?

Browse: four hundred and forty-eight Editor in charge: admin Release date: July 11, 2020 14:12:11

   Chain conveyor In the production process, long-term use of conveyor belt will stretch, which will cause some equipment failure. Therefore, it is necessary to check and adjust before use to ensure the operation of the equipment.

How to adjust the conveyor belt?

The belt tension of chain plate conveyor is caused by tightening the belt. When tilted upward, the tape's own gravity creates initial tension. In order to ensure that the belt tension is within a certain range, check the equipment before operation.

The adjustment should be careful of the following points: as usual, when using the conveyor belt, the appropriate strength should be adjusted first. The sagging between the adjacent two rollers of Belt should not be too large. If the material falls behind the conveyor belt and the roller bearing, the material will not roll off the belt. When conveying the belt, the tension of conveying materials should be considered and the appropriate Belt should be selected.

The conveyor belt has to be adjusted to take into account the equipment. Avoid belt deviation. The running deviation detection assembly can be considered, and the running deviation situation can be prompted in time.

Adjust the position of the drum on the conveyor belt, adjust the tightening bolts on the belt conveyor seat, and loosen the roller position of the drum, so as to pull the tension of the conveyor belt.

 Chain conveyor

How to do with the chain plate deviation of chain plate conveyor?

When we unload the material on one side of the chain plate, and when the concave convex on both sides of the rack are different, it will show the sign of deviation. It is necessary to modify the position of the unloading port to keep the material in the middle of the chain plate when unloading, and to keep the unloading direction the same as that of the chain plate. If there are two sides concave convex different time, to assemble the rack from the beginning, so that both sides of the rack can adhere to the level, can prevent deviation.

When the middle of the chain plate if the deviation, the same normal situation is that the roller assembly on the machine does not meet the requirements, or is the chain plate joint is not formed. At this time, you can move the roller frame on the other side of the deviation to the front of the chain plate. If the running deviation is tight, it is necessary to calibrate the roller frame from the beginning. When the chain plate joint is not correct, the chain plate can be cut straight and the chain plate buckle can be nailed again.

 Chain conveyor

When the head and tail of the chain plate deviate, the sprocket is usually heated and assembled with a deflection angle. The simple solution is to adjust the bearing seat on which side the chain plate runs off the roller, and then make the tension on the side of the chain plate deviate larger, and the chain plate will move to the side with less tension. If the deviation is tense, it is necessary to think from the beginning and proofread to make the parallelism of the middle line of the driving wheel and the driven wheel meet the requirements.
The above is about the chain plate conveyor belt adjustment and chain plate deviation related content, hope to bring you help.