泉州附近有没有服务

156 6698 0000
 Mesh belt
 Net Conveyor
 Net Conveyor
Industry news
You Are Here: home page  >  Industry news

What is the specification of stainless steel chain plate?

Browse: one hundred and seventy-two Editor in charge: admin Release date: 2020-07-23 10:24:40

It is widely used in food industry, food industry, food industry and so on.

With the continuous development of various professions, the production of various transport products has been further developed and utilized. As one of the professional manufacturers, we have been focusing on chain conveyor belt, stainless steel chain plate and B chain for many years. The production and supply of associated chain conveyors (e.g. mesh belts and conveyors) have their own purposes. The basic knowledge of its conveyor belt is introduced below.

 Real shot of stainless steel chain plate

The use of any equipment should have certain standards to avoid various types of problems, increase the power of equipment and stainless steel chain plate, so as to avoid harm to customers, which will be more useful. The manufacturer of stainless steel chain plate will make us fully understand the application standard of products, and hope we can pay attention to it.

Stainless steel chain plate manufacturers tell us that when choosing stainless steel chain conveyor, the mesh belt should first have a satisfactory strength, and then use low strength conveyor belt to stop high-strength conveyor belt. The equipment shall be equipped with limit azimuth limiter for stainless steel chain plate tensioning equipment. When lifting the active tensioning device to the limit position, make sure to turn off the lifting power and stop the lifting signal.

 Stainless steel chain plate structure

When descending to the limit position, make sure that the power supply has been actively locked and the stop signal has been sent. Third, stainless steel chain plate heavy hammer tensioning equipment should be equipped with protective equipment in the place where people often approach. The heavy hammer under the equipment should be able to prevent personnel from entering the space. If there is no such protective equipment, auxiliary equipment shall be installed under the heavy hammer. The distance from the ground or other working surfaces shall be at least 2.5m. For more standard details, please continue to follow our website.