How to deal with the reverse of chain conveyor?
Browse: four hundred and eighty Editor in charge: admin Release date: 15:30:59, August 5, 2020
The chain plate conveyor is a kind of transportation equipment which takes the professional chain plate as the carrier and starts from the back. Why can't the chain plate conveyor transport bottled objects? In addition, it can also be applied to the transportation of toilet paper or pulp board. During the shift, the chain conveyor is likely to be due to Hongtu, or improper operation, the chain conveyor is the opposite situation. Why is that?
Most of the degree section of the chain conveyor is used for cloth distribution, while the inclined section is used to transport toilet paper to higher positions. In the case of conveyor chain, it is very rare to ensure that the conveyor plate is evenly distributed.
However, in the endless low consistency continuous pulping system, the chain plate conveyor sometimes has more appearance, and the short-term stability of the large output toilet paper supply also promotes the chain plate conveyor to be knocked down. The similarity is that when the raw materials in the horizontal section are relatively small, and the raw materials in the inclined section are too large to be collected in some part of the components, they are easy to send out when the chain conveyor stops after tea.
1. Use a unified volume. Uniform roller can realize uniform dispersion of waste paper. It is generally installed in the horizontal and inclined transition position of chain plate conveyor, and the height of space position of supporting plate can be adjusted, and the output of horizontal pulping machine can be adjusted by adjusting the size of covering layer
2. The power transmission system adopts cycloid pin wheel reducer. Cycloid pin gear reducer uses the braking performance of small tooth difference K-H-V planetary transmission principle to prevent chain conveyor from reversing.
3. Use the brake. The working principle of the brake is to use the friction moment between the friction pairs to realize the braking function. This scheme takes less storage space and is more suitable for operation.
The above is the introduction of all the content, I hope to help you. If you want to learn more knowledge, you can visit our website, we will provide you with more professional information.