Today, I will introduce mesh belt conveyor to you. When people design mesh belt conveyor, they require that the mesh belt conveyor is mainly driven by motor reducer. When people use the net belt conveyor, it can make the net belt conveyor pass through the chain plates in parallel. It is because of this design of mesh belt conveyor that the differential speed can be formed when the belt conveyor is running, which can meet the needs of many industries.
Mesh belt conveyor is also known as continuous conveyor. This is a material conveyor, which can continuously transport materials on a specific line. Mesh belt conveyor is also a relatively common conveying equipment. In order to ensure the normal operation of the mesh belt chain, the mesh belt conveyor needs regular inspection and maintenance. In practice, we can perform the following operations:
First check the centerline and check the misalignment between the horizontal centerline of the roller and the longitudinal centerline of the conveyor belt. If the degree of inconsistency exceeds a certain range, it is necessary to use the mounting hole of the roller group for adjustment. In general, the conveyor belt is deflected to this side, and the roller group moves in the forward direction of the conveyor belt; it is also necessary to check the two plane deviation values of the bearing pedestal on both sides of the head and tail. If the deviation is greater than 1 mm on the plane. If the material is not centered on the cross section of the conveyor belt, the conveyor belt will deflect when conveying the material, so please check the position of the material on the conveyor belt correctly.
The stainless steel mesh belt in the mesh belt conveyor is usually used for transportation machinery under normal conditions, and the stainless steel mesh belt can not be over tensioned in the transportation machinery application. In other words, stainless steel mesh belt is very important in the equipment. If the stainless steel mesh belt is over tensioned, it may lead to many consequences of over tension.
The stringer in the stainless steel mesh belt is subjected to excessive force, which will cause cracks and then become serious mechanical defects, which will increase the friction between the chain pin and the chain. The chain pitch is large, which greatly reduces the excessive tension in the service life of stainless steel mesh belt products, and makes the stainless steel mesh belt network deform under the action of force, thus affecting the overall quality of the product.
Excessive tension will increase the pressure between the main drive shaft and the driven shaft, which will increase the ball grinding force and affect the bearing life. The result of over tension of the stainless steel mesh belt is also obvious, so it is expected that users will use the stainless steel mesh belt without considering the environment in the future.
Please make sure to pay attention to the tension of the stainless steel mesh belt and do not over tighten the stainless steel mesh belt. We ensure the integrity before use, so that the mesh belt conveyor can be used normally. For more expertise on mesh belt conveyor, please continue to pay attention to our website.