Net Conveyor Product introduction:
It is a kind of material handling machine, which can continuously transport materials on the corresponding production line, also known as continuous conveyor, which can be divided into mesh belt type and mesh chain type. The conveyor can be horizontal, inclined and vertical, or can form a fixed space conveyor line. Long distance, long transport capacity. It can also complete multiple process operations during transportation. The materials used for mesh belt conveyor are carbon steel, 201 stainless steel and 304 stainless steel.
Large conveying capacity: the conveying capacity is up to 526m3 / h, and the inclination angle is up to 60 degrees. High temperature resistant, it can transport materials with temperature lower than 600 ℃.
The conveyor chain is composed of traction chain, load chain and front (or reverse) hopper. The three parts can be loaded and unloaded freely.
The bearing roller has rolling bearing, which replaces the previous sliding friction with rolling friction. The running resistance is reduced by 55% - 65%, which greatly reduces the power consumption of the conveyor, and the energy consumption is low.
The traction chain is separated from the load chain, which simplifies the structure, reduces the cost, and is convenient for installation and maintenance.
It is no longer made of long distance steel chain, and the bearing chain is made of long bearing material, and the service life of the chain is reduced.
The process layout is diverse: it can be horizontal, inclined, or multi-level horizontal and inclined combination.
Scope of application:
It is widely used in cement, paper making, sugar making, chemical industry and other industries. Suitable for slurry, particle, etc.
Before the operation of the belt conveyor, first confirm that the belt conveyor equipment, personnel and goods are in good condition; secondly, check whether the moving parts are normal, check whether all wires are normal, and then make the belt conveyor normal. Run. Then check whether the difference between the supply voltage and the rated voltage of the device exceeds ± 5%.
The specific operation of mesh belt conveyor is as follows:
1. Turn off the main power switch and check whether the power supply of the equipment is normal and whether the power indicator is on. After normal operation, proceed to the next step.
2. Turn off the power switch of each circuit and check whether it is normal. When the frequency converter does not work normally, the indicator light of the frequency converter and the belt is not working normally.
3. Start each electrical equipment in turn according to the process flow, and then start the next electrical equipment after the previous one is started normally.
4. In the operation of belt conveyor, it is necessary to comply with the provisions of articles in the design of conveying articles and the conveying capacity of belt conveyor. Secondly, it should be noted that all types of personnel are not allowed to contact the moving parts of the belt conveyor. Non professionals are not allowed to touch electronic components and control buttons at will. Then, the mesh belt conveyor cannot be disconnected from the back stage of inverter during operation. If maintenance needs to be determined, it must be stopped when the frequency conversion operation stops. Otherwise, it may be the inverter damage.
5. The belt conveyor stops running. After the system stops completely, press the stop button to stop the total power.